ac input range selected by switch built-in passive pfc function compliance to en61000-3-2 with ac on-off switch 3 poles ac inlet with fuse holder protections: short circuit / overload / over voltage / over temperature charger type can be selected (optional) charger for lead-acid batteries 2 color led loading indicator open frame models available (without safety approval) low cost, high reliability 2 years warranty features : s:power supply a:voltage detector :o.d.m. number p:open p.c.b. c:with case 13:13.8v 27:27.6v 54:55.2v b:current detector p:with pfc n:none pfc p a 120 p 13 c 120w single output power supply or battery charger pa / p b - 1 2 0 s e r i e s specification pa/PB-120 -13 pa/PB-120 -27 pa/PB-120 -54 model dc voltage rated current current range rated power led indicated output voltage range frequency range power factor (typ.) efficiency (typ.) input environment inrush current (typ.) leakage current over temperature safety standards harmonic current emi conduction & radiation safety & ems immunity emc (note 4) withstand voltage isolation resistance working temp. working humidity storage temp., humidity temp. coefficient vibration overload over voltage protection ac current (typ.) 13.8v 27.6v 55.2v 7.2a 4.3a 2.2a 0 ~ 7.2a 0 ~ 4.3a 0 ~ 2.2a 99.36w pa series voltage 105% 1% : red / 105% 1% :green pb series load 46% 10% : green / 46% 10% :red 118.68w 121.44w 88 ~ 132vac / 176 ~ 264vac selected by switch 47 ~ 63hz >0.65 (with pfc series) 73% 79% 79% 3a/115vac 1.5a/230vac cold start 25a/115vac 50a/230vac <1.5ma / 240vac 90 ~ 110% rated output power 15 ~ 17v 30 ~ 35v 60 ~ 66v protection type : constant current limiting, recovers automatica lly after fault condition is removed protection type : hiccup mode, recovers automatically after fault co ndition is removed rth2 70 10 detect on rth2 thermistor protection type : shut down o/p voltage, recovers automatically after t emperature goes down ul60950-1, tuv en60950-1, en60335, en60335-1, en60335-2-29 app roved compliance to en55022 (cispr22) class b compliance to en61000-3-2,-3 compliance to en61000-4-2,3,4,5,6,8,11; env50204, en55024, li ght industry level, criteria a i/p-o/p:3kvac i/p-fg:1.5kvac o/p-fg:0.5kvac i/p-o/p, i/p-fg, o/p-fg:100m ohms/500vdc -10 ~ +45 (refer to output load derating curve) 20 ~ 90% rh non-condensing -20 ~ +85 , 10 ~ 95% rh 0.05%/ (0 ~ 45 10 ~ 500hz, 2g 10min./1cycle, 60min. each along x, y, z axes tuv rheinland product safety geprufre sicherheit mtbf 149.6k hrs min. mil-hdbk-217f (25 ) dimension others note packing pcb type:144*90*33mm external case type:180*96*49mm (l*w*h) 1.1kg; 16pcs / 17.9kg / 1.47cuft(without pfc) 1.24kg; 16pcs / 20.1kg / 1.47 cuft(with pfc) 1. all parameters not specially mentioned are measured at 230vac input, r ated load and 25 of ambient temperature. 2. ripple & noise are measured at 20mhz of bandwidth by using a 12" twisted pair- wire terminated with a 0.1uf & 47uf parallel capacitor. 3. tolerance : includes set up tolerance, line regulation and load regula tion. 4. the power supply is considered a component which will be installed into a fi nal equipment. the final equipment must be re-confirmed that it still me ets emc directives. 5. with pfc i/p range: 95~132vac/190~264vac. 6. for open p.c.b. with 17.8cfm min. forced air. authorized distributor: total power international, inc. toll free: 877-646-0900(us) ph# (978)453-7272 www.total-power.com
mechanical specification derating curve charging curve authorized distributor: total power international, inc. toll free: 877-646-0900(us) ph# (978)453-7272 www.total-power.com case no. ps-120a unit:mm ambient temperature ( ) load (%) output cable length=183cm 5cm case: pin no. 1 2,3 assignment dc output +v dc output -v 10 20 30 40 50 60 20 40 60 80 100 -10 0 other series open frame series 17.8cfm air cooling (l=15cm face hs) type b:current detecter,2 voltage section type a:voltage detecter,pulse charger led color red green led color red green vout 105% 100% charging current bat. voltage t 100% iout bat. voltage vout 105% 100% charging current 45% 100% iout t 5 open short 144 134 80 4- 3.8 90 f 4 a/250v 1 2 3 cn1 cn5 5 -v 230v 115v for for - + 2 1 adj. cn4 led 1 cn3 4 2 3 +v 180 49 fuse 115 3 1 2 pcb: ac input connector (cn1) : jst b3p-vh or equivalent dc output connector (cn3) : jst b4p-vh or equivalent 12vdc fan output connector (cn4) : jst b2b-xh or equivalent 115/230v selected by switch connector (cn5) : jst b2p-vh or equivalent pin no. pin no. pin no. switch 1 1,2 1 115v 3 2 3,4 2 230v assignment assignment assignment assignment ac/l -v +v short ac/n no pin +v -v open mating housing mating housing mating housing mating housing jst vhr jst vhr jst xhp jst vhr jst svh-21t-p1.1 jst svh-21t-p1.1 jst sxh-001t-p0.6 jst svh-21t-p1.1 or equivalent or equivalent or equivalent or equivalent or equivalent or equivalent or equivalent or equivalent terminal terminal terminal terminal (horizontal) 33 2 max. 120w single output power supply or battery charger pa / p b - 1 2 0 s e r i e s
|
